3 Stage Removable Case Trolley

Part No
H4515
A$92.16
In stock
3 Stage Removable Case Trolley 

Wheel Base: 325mm 
Closed: 435mm 
Opened to mid-stop: 730mm 
Fully opened: 975mm 
Recommended Load Capacity: 25kg
3 Stage Removable Case Trolley 

Wheel Base: 325mm 
Closed: 435mm 
Opened to mid-stop: 730mm 
Fully opened: 975mm 
Recommended Load Capacity: 25kg

3D Content Central
Technical Information
Material Steel/ Plastic
Weight 988g
Customer Questions
How much weight is that rated to handle?
This H4515 handle is rated for 30kg / 66 lbs
Hello from Japan. Is this item possible to take off the wheels or do carry similar item without wheels ?
Hi, Thank you for the question. If you require a pull out handle without wheels then H2000 maybe a good option for you instead of the H4515.
Hi, What size rivets are best to use for this handle on a custom Swan Flight case?
Thank you for your enquiry. The fixing holes are 4.4mm / 0.17" diameter with a 8.4mm / 0.33" countersink diameter Many Thanks Penn Elcom
Hi, What is the max load for this trolley? Thanks.
Thank you for the question. The maximum load capacity for this H4515 handle is 25kg / 55lbs.
Hi I am not sure how this works. Do you screw it to the flight case underside thus adding wheels and a trolley handle?
Thank you for your enquiry, This H4515 handle can be fitted to any side of the exterior of a case. Kind Regards Penn Elcom
Hi, this is a bit of a silly question but I thought I'd ask as there's no reverse image. Could I use the H4515 to attach to a flight case? And if so is there anything I should be aware of? Obviously I'll need be careful of dimensions and not blocking the lid from opening.
Thank you for your enquiry, Yes this is suitable for fitting to a flight case. You may find it useful to review the 3d diagram of this handle: http://www.3dcontentcentral.com/download-model.aspx?catalogid=6237&id=1024652 Kind Regards Penn Elcom...
I don't understand the photo. What are these two rods floating in the air? Is there a hinged bottom ledge for a bag to sit on? It just looks like a flat trolley
Thank you for your enquiry, The "Floating rods" are for fixing the H4515 handle to the case / equipment. A full 3D file of the handle can be viewed here - https://www.3dcontentcentral.com/download-model.aspx?catalogid=6237&id=1024652 Regards ...
Do you have a schematic from the side that shows the height of the permanently attached pieces and also the height of the handle and wheels above the mounting surface when attached? How does the "clip on" work? Thank you.
Thank you for your enquiry regarding the H4515, The full 3d file can be viewed here - https://www.3dcontentcentral.com/download-model.aspx?catalogid=6237&id=1024652 Regards Penn Elcom
Did you find what you were looking for?
Write Your Own Review
You're reviewing:3 Stage Removable Case Trolley
Your Rating

Enquire about this product

For price, stock availability and other information about this product, please contact us using the form below.

sgm_clp_1 div for segmentify