Led Driver Ot 250/220-240/24 Dim P 24v 250w 4052899545908

Osram

Part No
LEDOT25024DIMP
CV Power supplies 24 V with 1-10 V Product benefits: Large range of products from 20 W to 250 W Installation in very cold and hot environments Very stable output power High electronical reversible...

Ask a question about this product

For price, stock availability and other information about this product, please contact us using the form below.
CV Power supplies 24 V with 1-10 V
 
Product benefits:
Large range of products from 20 W to 250 W
Installation in very cold and hot environments
Very stable output power
High electronical reversible short-circuit, overload, overtemperature protection
Smart Power Supply boosting power to turn on cold LEDs
Independent installation possible
Dimming range 1-100 %
 
Product features:
DC mode functionality
Type of protection IP66 and IP67
Surge protection up to 4 kV (L-N) / 6 kV (L/N-PE)
Wide operating temperature range -30 +55 C
Lifetime up to 50000 h (temperature at max. tc)
Dimmable via fully isolated 1-10 V interface
 
Areas of application:
Facades, public squares, cruise ships
Signage
Suitable for indoor and outdoor installations
 
EAN: 4052899545908
Nominal voltage: 220-240 V
Mains frequency: 0-60 Hz
Input voltage AC: 198-264 V
Total harmonic distortion: < 15 %
Power factor: 0.95
ECG efficiency: 92 %
Device power loss: 20 W
Power loss in stand-by mode: <0.5 W
Inrush current: 75 A
Max. ECG no. on circuit breaker 10 A (B): 3
Max. ECG no. on circuit breaker 16 A (B): 8
Max. ECG no. on circuit breaker 25 A (B): 13
Surge capability (L/N-Ground): 6 kV
Surge capability (L-N): 4 kV
Nominal output voltage: 24.2 V
U-OUT (working voltage): 30 V
Nominal output power: 250 W
Galvanic isolation: SELV
Galvanic isolation primary/secondary: 3 kV
nput voltage DC: 176-276 V
Length: 265 mm
Width: 68 mm
Height: 40 mm
Mounting hole spacing, length: 250 mm
Product weight: 1340 g
Cable cross-section, input side: 1.0 sqmm
Cable cross-section, output side: 1.0 sqmm
Wire preparation length, input side: 90 mm
Wire preparation length, output side: 90 mm
Cable/wire length, control input: 320 mm
Cable/wire length, input side: 300 mm
Cable/wire length, output side: 300 mm
Casing material: Plastic
Ambient temperature range: -30 +55 C
Maximum temperature at tc test point: 80 C
Max.housing temperature in case of fault: 110 C
Permitted rel. humidity during operation: 5-85 %
ECG lifetime: 50000 h
Encapsulated: Yes
Dimmable: Yes
Dimming interface: 1-10 V
Dimming range: 1-100 %
Dimming method: Pulse Width Modulation
Overheating protection: Yes
Overload protection: Yes
Short-circuit protection: Yes
No-load proof: Yes
Suitable for fixtures with prot. class: I
Type of connection, output side: Cables
Number of channels: 1
Approval marks: ENEC/RCM/CCC/EAC
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 60598-1/Acc. to EN 62384
Protection class: I
Type of protection: IP66/IP67
Temperature range at storage: -40 +85 C
Commodity code 8504408290
More Information
Weight 3lbs
Customer Questions
No Questions
Did you find what you were looking for?
Write Your Own Review
You're reviewing:Led Driver Ot 250/220-240/24 Dim P 24v 250w 4052899545908
Your Rating

Ask a question about this product

For price, stock availability and other information about this product, please contact us using the form below.

sgm_clp_1 div for segmentify