Led dimmer Oti Dali Dim 1-4ch 240w 4062172166010

Osram

Part No
LEDOTDALIDIM4CH
A$192.61
In stock
OTi DALI DIM 1-4CH D Suitable to use with single colours and TW options Product benefits: Specifically designed flex LED tapes and signage modules Class II design for a wide range of application High...
OTi DALI DIM 1-4CH D
Suitable to use with single colours and TW options

Product benefits:
Specifically designed flex LED tapes and signage modules
Class II design for a wide range of application
High power handling on 4 channels
1 to 4 channel output with DALI-2 certification
DT6 and DT8 operations through DIP switch selection

Product features:
12-48 V SELV output constant voltage range
Output power up to 240 W
Total power handling allowed on CH1
Overload/Over temperature/Short circuit protection, automatic, reversible
50.000h at tc max = 60 C
Screw terminals and integrated cable clamps
Suitable for Class I & II luminaires (EMI immunity for class I).
Wide ta range -25 +50 C
DT6 or DT8 selection through DIP switch
Touch DIM compatibility
5 years guarantee

Areas of application:
Suitable for indoor installations
Separate installation (ceiling mounting)
Hospitality – decorative lighting, night light, dynamic lighting
Restaurants – decorative lighting
Shops – decorative lighting, shelf lighting
Residential – cove lighting, cabinet lighting

Technical data:
EAN: 4062172166010
Nominal input voltage: 12-48 V
Mains frequency: 0 Hz
Nominal output voltage: 12-48 V
Nominal output power: 240 W
Min. load/channel: 20W
Max output current/dimmer (DT6 & DT8): 10A*
Capacitive load: 1 microF/A
Power loss in no-load condition: <= 0.5
Standby power: <= 0.5
Secondary switching: NOT allowed
Galvanic isolation: SELV
Output PWM frequency: 3k Hz
Mounting hole spacing, length: 175.5 mm
Product weight: 86.00 g
Cable cross-section, input side: 0.5 - 2.5 sqmm
Cable cross-section, output side: 0.5-2.5 sqmm
Wire preparation length, input side: 5-8 mm
Wire preparation length, output side: 5-8 mm
Height: 20.0 mm
Length (Total); 181.0 mm
Length (Holes interaxis); 175.5 mm
Width: 42.0 mm
Weight: 100 g
Casing material: Plastic
Ambient temperature range: -20 +50 C
Maximum temperature at tc test point; 60 C
Temperature range at storage: -40 +85 C
Permitted rel. humidity during operation: 5-85 %
ECG lifetime: 50000 h
Encapsulated: No
Dimmable: Yes
Dimming interface: DALI-2
DALI interface polarity: No
Dimming range (logarithmic curve): 0.1 - 100 %
Dimming method: PWM
PWM frequency: 3 kHz
Safe Dimming Technology: Yes
Overheating protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Protection class: II
Suitable for fixtures with prot. class: I / II
EMI immunity: for class I
Type of connection, input side: Screw terminal
Type of connection, output side: Screw terminal
Number of channels: 4
Corridor Function: Yes
Approval marks – approval: CE / EAC / RCM / ENEC 05
Standards: Acc. to EC 61347-2-13/Acc. to EN 62384/Acc. to EN 55015/Acc. to EN 61547
Type of protection: IP20
Casing material: Plastic (White RAL9010)
Commodity code: 853710989900

*Please check output power chart in technical datasheet file for max. output wattage/current for each channel in DT6 and DT8 modes
Technical Information
Weight 100g
Customer Questions
No Questions
Did you find what you were looking for?
Write Your Own Review
You're reviewing:Led dimmer Oti Dali Dim 1-4ch 240w 4062172166010
Your Rating

Enquire about this product

For price, stock availability and other information about this product, please contact us using the form below.

sgm_clp_1 div for segmentify