|Home PageLED Flex and ModulesPenn Elcom Led power feeder (connector) Ip20 for 12mm Rgbw strips LEDCLC5PIN12||
Penn Elcom Led power feeder (connector) Ip20 for 12mm Rgbw strips LEDCLC5PIN12 £1.86
Comus 5pin IP20 power feeding connector for 12mm wide RGBW LED strips
This quick to use connector saves time and effort compared to other connectors avaialble on the market.
It also removes the need to solder on site.
Easy to use connector. Just unclick the right upper half part of the connector, carefully push the 12mm strip inside until the PCB pad fits below the 5 pins.
Always take note to ensure correct polarity before powering the strip.
Compatible with both the IP20 and IP65 RGBW Comus Strips. When used with the IP65 it will downgrade the rating to IP20 unless additional actions are taken to preserve the IP65 rating.
This power feeder can carry a max. current of 3A (so 72W at 24V or 36W at 12V).
Fixing - we strongly recommend the use of a double adhesive tape underneath the connector or the use of silicone. This will fix the connector in place along with the LED tape connected to it.
With cover - LEDAL09, LEDAL20, LEDAL21, LEDAL23, LEDAL31, LEDAL32, LEDAL33, LEDAL40, LEDAL41, LEDAL42
Rated current: 3 A
Max wattage (12/24V): 36/72 W
LED strip required width: 12 mm
Cable length: 145 mm
Conductor cross section AWG: 22 (0.33 sqmm)
Cable rated insulation voltage: 300 V
Width: 16.5 mm
Length: 15 mm
Height: 5 mm
Quantity: sold individually
Seen a lower price elsewhere? Penn Elcom Online will do our best to match any price request, simply click below
Jennifer from United States asks
Could you tell me if you have a 3D model available for this part so I can place it into my next higher assembly?