|Home PagePowerNeutrik PowerCON Mains Output 3 Pin 20A Cable Disassembled Bulk Box NAC3FCB-D||
Neutrik PowerCON Mains Output 3 Pin 20A Cable Disassembled Bulk Box NAC3FCB-D £569.80
NAC3FCBD Neutrik PowerCON out cable connector
The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.
Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live!
NAC3FCA and NAC3MPA are used for power in to a unit
NAC3FCB and NAC3MPB are used for power out of a unit
Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating. Branded with unique hologram - guarantees genuine and authentic Neutrik product.
THESE ARE DISASSEMBLED CONNECTOS AND ARE ONLY AVAILABLE TO ORDER IN BOX QUANTITIES OF 100.
Number of contacts: 3 - for line, neutral and predating safety ground
Rated current per contact: 20 A rms
Rated voltage: 250 V ac
Dielectric strength: 4000 V dc
Cable O.D.: 5-15 mm
Wire size: 2.5 mm
Wire size: 14 AWG
Wiring: screw type terminals or soldering
Locking device: quick Lock
Priced per connector: available only in box quantities
Packing information: Box quantity = 100
Rohan from United Kingdom asks
Does the connector come with screws for screwing into the rack panel?