The DALI PCU provides intuitive manual dimming and switching of DALI light fittings, and implements DALI edition 2.
You can combine it with standard mains-fed presence and motion detectors, and connect up to 4 units in parallel to set up multiple control points with automatic synchronization between them.
You can also configure its behavior in the event of power failure It is a great choice in conference rooms, particularly with moveable partition walls, and for restaurant lighting and shoplighting.
Each DALI PCU uses a control cable of up to 300 meters, has an integrated DALI supply and allows you to set a custom minimal brightness level.
Intuitive manual dimming and switching
Integrated DALI supply
Individual setting of minimal brightness level
Up to four DALI PCU can be connected in parallel to set up multiple control points
Automatic synchronization between the control points
Combinable with standard presence- and motion detectors with mains contact
Behavior after power failure configurable
Length of the DALI control cable: up to 300 m
Areas of Application:
Equipment / Accessories:
Suitable for up to 25 electronic control gears
Flexible expansion via DALI repeaters or further DALI PCUs
Nominal voltage: 230 V
Mains frequency: 50/60 Hz
System wattage: 2 W
Length: 48 mm
Width: 48 mm
Height: 22 mm
Product weight: 36 g
Product colour: Light grey
Ambient temperature range: 0 +40 C
Dimming interface: DALI
Number of control outputs: 1
Type of installation: Integrated in flush device box
Type of protection: IP20
Protection class: II
Approval marks approval: VDE
Approval marks approval: CE