Osram Led Driver Fit 50/220-240/350 Linear Constant Current 4052899222595

Please select an item from the list
Be the first to review this product Write A Review
  • Description
  • Reviews
  • Q&A
OT FIT 50/220-240/350 D L

Product features

Supply voltage 220-240 V
Line frequency 0 Hz, 50/60 Hz
Line voltage 198-264 V
Safety according to EN 61347-1, 61347-2-3, 61347-2-13, 62384
Module operation according to EN 60929
RI suppression according to EN 55015:2007+A1:2007/CDN
Line harmonics according to EN 61000-3-2
Immunity according to EN 61547
Lifetime up to 100000 h (temperature at Tc = 65 C, max. 10 % failure rate)

Product features

Versatile scope of application due to output power range of up to 80 W
Safety requirement due to overload, overtemperature, Hot Plug protection
High efficiency and reliability
Higher quality of light thanks to low output ripple current

Areas of application

Installation in emergency lighting systems according to IEC 61347-2-3, appendix J
Suitable for use in luminaires with flexible current setting (Tri-Tap)
Suitable for indoor SELV and non-SELV installations
Suitable for luminaires of protection class I

EAN: 4052899222595
Input voltage AC: 198 - 264 V
Input voltage DC: 176 - 276 V
Mains frequency: 50/60 Hz
Output voltage: 27-54 V (max. 60 V)
Output current: 350 mA
Nominal voltage: 220-240 V
Nominal current: 0.11 A
Device power loss: 5 W
Protective conductor current: < 2 mA
Power factor ? (at 230 V full): > 0.95
ECG efficiency (at 230 V and full load): > 90 %
Inrush current: 24 A
Max. no. of ECGs on circuit breaker 10 A (B): 35
Max. no. of ECGs on circuit breaker 16 A (B): 56
Max. no. of ECGs on circuit breaker 25 A (B): -
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 54-150 V
Nominal output current: 350 mA
Output current tolerance: �10 %
Nominal output power: 52 W
Galvanic isolation: Non isolated
Galvanic isolation primary/secondary: Non Isolated
Lenght: 210 mm
Width: 30 mm
Mounting hole spacing, lenght: 200 mm
Mounting lenght: 200 mm
Height: 21 mm
Weight: 125 g
Cable cross-section, input side: 0.5 - 1.5 sqmm
Cable cross-section, output side: 0.5 - 1.5 sqmm
Wire preparation lenght, input side: 8.5 - 9.5 mm
Wire preparation lenght, output side: 8.5 - 9.5 mm
Casing material: Metal
Ambient temperature range: -15 +50 C
Temperature range at storage: -25 +85 C
Maximum temperature at tc test point: +75 C
Max. housing temperature in case of fault: +110 C
ECG lifetime: 50000 h
Encapsulated: No
Dimmable: No
Suitable for fixtures with prot. class: I
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Yes
No-load proof: Yes
Maximum wiring lenght ECG/lamp: 2 m
Type of protection: IP20
Approval marks: ENEC10/VDE/EMC/EL/CE
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384
Type of protection: IP20
Manufacturers Website: www.osram.com/osram_com/products/led-technology/electronic-control-gears-for-led-modules-and-dimmers/indoor-ecg-for-led-modules-and-dimmers/linear-area-constant-current-non-dimmable/optotronic-fit
Our Best Selling Osram LED Power Supplies and Controls
Loading ...
Our Best Selling LED Power Supplies and Controls
Loading ...
Our Best Selling Osram Products
Loading ...