Osram Led Driver Ot Fit 30/220-240/700 Cs 4052899435636  £11.52


Enlarge Image
ItemCodeStockQuantityPriceRRPSaving
LEDOTFIT30700CSIn Stock1
£11.52
 
Buy
Postage to United Kingdom on this item is £5.40
FREE UK Delivery Over £100
Trust pennelcomonline.com for excellent service
  • Description
  • Downloads
  • Reviews
  • Q&A
OPTOTRONIC FIT CS
OT FIT 30/220-240/700 CS
OPTOTRONIC FIT CS - Compact Constant Current LED Drivers � Non dimmable


The OPTOTRONIC FIT CS G2 is a constant current LED power supply that has an extensive lifespan, and can be independently mounted with the matching cable clamp kit.
You can use it with downlights, spotlights and in LED panels, and in luminaires of protection classes I and II.
The many benefits of this product include a high quality of light, thanks to its low output ripple current, lots of flexibility thanks to 4 different output currents, and enhanced levels of efficiency and reliability.

Product features

Supply voltage 220-240 V
Line frequency 50 Hz - 60 Hz
Line voltage 198-264 V
Safety according to EN 61347-1, 61347-2-13, 62384
RI suppression to EN 55015
Line harmonics according to EN 61000-3-2
Immunity according to EN 61547
Lifetime up to 50000 h (temperature at Tc = 70 C, max. 10 % failure rate)
Cable clamp kit for independent mounting

Product benefits

High quality of light thanks to low output ripple current
High flexibility due to four different output currents
Small housing for flexible luminaire designs
High efficiency

Areas of application

Suitable for downlights, spotlights and LED panels
Suitable for luminaires of protection classes I and II

Cable clamp for independent installation NOT included

EAN: 4052899435636
Nominal input voltage: 220-240 V
Mains frequency: 50-60 Hz
Input voltage AC: 198-264 V
Total harmonic distortion: < 10 %
Power factor: 0.98
ECG efficiency: 89 %
Device power loss: 3.5 W
Protective conductor current: <0.7 mA
Inrush current: < 16 A
Max. ECG no. on circuit breaker 10 A (B): 15
Max. ECG no. on circuit breaker 16 A (B): 25
Max. ECG no. on circuit breaker 25 A (B): -
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 23-42 V
U-OUT (working voltage): 60 V
Nominal output current: 500 / 600 / 700 / 650 mA
Output current tolerance: +/- 7.5 %
Output ripple current (100 Hz): < 5 %
Nominal output power: 11.5-29.4 W
Galvanic isolation: SELV
Length; 97 mm
Width: 43 mm
Height: 29.5 mm
Mounting hole spacing, length: 88 mm
Mounting hole spacing, width: 34 mm
Product weight: 90 g
Cable cross-section, input side: 0.5-1.5 sqmm
Cable cross-section, output side: 0.5-1.5 sqmm
Wire preparation length, input side: 7-8 mm
Wire preparation length, output side: 7-8 mm
Casing material: Plastic
Ambient temperature range: -20 +50 C
Maximum temperature at tc test point: 80 C
Max.housing temperature in case of fault: 110 C
Permitted rel. humidity during operation: 5-85 %
ECG lifetime: 50000 / 30000 h
Encapsulated: No
Dimmable: No
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof; Yes
Max. cable length to lamp/LED module: 2 m
Suitable for fixtures with prot. class: II
Type of connection, output side: Push terminal
Approval marks � approval: CCC / CE / RCM / ENEC 05
Standards: Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to CISPR 15/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547
Type of protection: IP20
Temperature range at storage: -20 +80 C
Our Best Selling Osram Products
Loading ...