Osram Led Driver Oti Dali 35/220-240/400 D Lt2 L G3 4052899494220  £26.48


Enlarge Image
ItemCodeStockQuantityPriceRRPSaving
LEDOTIDALI35400LIn Stock1
£26.48
 
Buy
Order in the next 13 Hours 13 minutes 43 seconds for dispatch today
Postage to United Kingdom on this item is £5.40
FREE UK Delivery Over £100
Trust pennelcomonline.com for excellent service
  • Description
  • Downloads
  • Reviews
  • Q&A
OTi DALI 35/220-240/700 LT2 L
OPTOTRONIC Intelligent � Dimmable DALI


This constant current LED driver is suitable for emergency lighting systems according to IEC 61347-2-13, appendix J, and for use in luminaires of protection classes I and II.
Use it with luminaires of flexible current setting (DALI, CLO, LEDset) and for downlights, spotlights and LED panels � some versions can be installed and/or independently mounted using the matching cable clamp kit.
OSRAM�s use of DALI technology makes this power supply great in various settings; the 3-level corridor function makes it useful for corridors and restrooms, and its easy-to-control.
TouchDIM functionality is also energy efficient, with automatic switch-off in sufficient residual light.
This versatile DALI driver gives you flexible output characteristics, system protection via thermal management and Smart Control, and quality dimming between 1 and 100 % thanks to amplitude dimming (OTi DALI 15).

Product benefits

Fully programmable via software (DALI Interface)
Flexible current setting (LEDset2)
Lifetime up to 100000 h (temperature at Tc = 65 C, max. 10 % failure rate)
High-quality dimming of 1-100 % by amplitude dimming (except 80 W versions)
High quality of light thanks to <1% output ripple current
Very high efficiency
Very low standby power consumption < 0.15 W (SELV), < 0.25 W (non-isolated)
Fulfill safety requirement due to overload, overtemperature, Hot Plug protection

Product features

Line frequency 0 Hz - 50 Hz - 60 Hz
Versatile DALI window driver up to 90 W due to flexible output characteristic
Supply voltage 220-240 V
Available with output current range up to 2100 mA
Constant Lumen Output (CLO)
Integrated customizable thermal management (Driver Guard)
SELV and non-isolated versions available
DALI-2 certified (Part -101,-102 and -207)

Versatile scope of application due to OSRAM DALI Technology

Easy to use in corridors and restrooms because of three-level Corridor function
Touch DIM application: easy to control via pushbutton or sensor
Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
Feedback of power consumption and operating hours (Fit for SMART GRID)
Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
Luminaire information for easy maintenance

Areas of application

Linear lighting for office, education, industry, storage areas and retail
Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
Suitable for luminaires of protection class I

EAN: 4052899494220
Nominal input voltage: 220-240 V
Mains frequency: 50-60 Hz
Input voltage AC: 198-264 V
Input voltage DC: 176-276 V
Current set: DALI
Current set: LEDset
Current set: Programmable
Total harmonic distortion: < 10 %
Power factor: > 0.95
ECG efficiency: =< 92 %
Device power loss: 4 W
Power loss in stand-by mode: <0.25 W
Protective conductor current: <0.5 mA
Inrush current: 17 A
Max. ECG no. on circuit breaker 10 A (B): 17
Max. ECG no. on circuit breaker 16 A (B): 28
Max. ECG no. on circuit breaker 25 A (B): 43
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 54-240 V
U-OUT (working voltage): < 250 V
Nominal output current: 75-400 mA
Output current tolerance: +/- 3 %
Output ripple current (100 Hz): < 1 %
Nominal output power: 4-38 W
Galvanic isolation: Non isolated
Length? 280.0 mm
Width: 30.0 mm
Height: 21.0 mm
Mounting hole spacing, length: 270.0 mm
Product weight: 205 g
Cable cross-section, input side: 0.5-1.5 sqmm
Cable cross-section, output side: 0.5-1.5 sqmm
Wire preparation length, input side: 8.5-9.5 mm
Wire preparation length, output side: 8.5-9.5 mm
Casing material: Metal
Ambient temperature range: -25 +60 C
Maximum temperature at tc test point: 75 C
Max.housing temperature in case of fault: 110 C
Permitted rel. humidity during operation: 5-85 %
ECG lifetime: 50000 h
Encapsulated: No
Programming interface: DALI
Dimmable: Yes
Dimming interface: DALI
Dimming interface: Touch DIM
Dimming interface: Touch DIM Sensor
Dimming range: 1-100 %
Dimming method: Full analogue dimming
Constant lumen function: Programmable
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Max. cable length to lamp/LED module: 2.0 m
Suitable for fixtures with prot. class: I
Suitable for emergency lighting: Yes
Type of connection, output side: Push terminal
Approval marks � approval: ENEC10, VDE-EMC, EL, CE, CCC, RCM
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 62386
Type of protection: IP20
Temperature range at storage: -25 +85 C
Our Best Selling Osram LED Power Supplies and Controls
Loading ...
Our Best Selling LED Power Supplies and Controls
Loading ...
Customers Who Bought This Item Also Bought
Our Best Selling Osram Products
Loading ...