1U Rack Drawer with 2 Slam Locks

Part No
R1291K/2L
£57.62 £48.02
In stock
1U Rack Drawer with 2 Slam Locks. Can be used upside down as a shelf. Inside Dimensions: Width x Depth x Height = 415mm x 364mm x 41mm Recommended Load Capacity: 19kg...
1U Rack Drawer with 2 Slam Locks. Can be used upside down as a shelf. 

Inside Dimensions: 
Width x Depth x Height = 415mm x 364mm x 41mm 

Recommended Load Capacity: 19kg

3D Model
Technical Information
Load Capacity 19kg
Material 1.2mm Steel
Size (U) 1U
Weight 3.18kg
Depth 38cm
Finish Black
Customer Questions
Hello, Is there a positive stop on this R1291 drawer when pulled out ? Will it stop with out having to push in tabs or clips to remove it completely ? Thank you
The drawer will stop at its maximum extension, you have to push the clips to remove the tray
Do you make a 1 unit drawer with a lock and key?
Unfortunately a 1 unit drawer with a lock and key is not currently a product option in our range. However, we will be sure to express your interest to our designers and will add your suggestion to our product development list. Thank you for your question...
Does this also lock open? Is there another slide that locks in the open and closed position?
Thank you for your enquiry, The runers have slight stays locking in position when open, These are only friction stays. Regards PennElcomOnline
Hey looking for something like this but for a shallow 270mm deep rack unit, wonder if something like this would be available. Thanks Mike
Thank you for your enquiry, We do not have anything in the standard range, We do offer a custom metal service, If you would like a quotation please email us at [email protected] Regards Penn Elcom
is the 1U rack drawer available with a front silver finish?
Thank you for your enquiry, Yes all products are custmoisable, please email us with the quantity required and we will provide a suitable cost Regards Penn Elcom
is this R1291K/2L available with a front silver finish?
Thank you for your enquiry, We can offer a custom metal service. Please email us and we will provide a suitable quotation Kind Regards Penn Elcom
Do you do a 1U R1291 Drawer where the actual drawer length (front to back) is longer than 370mm (ideally nearer 500mm ?
Thank you for your enquiry, We offer the R1290-600/1UK which is 600mm / 23.62" deep Kind Regards Penn Elcom
Do you havea detailed dimension drawing of the panel, including the locks etc. We have an application where the amount of remaining space on the front panel, excluding locks is critical
Thank you for your enquiry regarding the R1291K/2L, Please visit the below link, You can download the full schemtic in 2d and 3d - https://www.3dcontentcentral.com/download-model.aspx?catalogid=6237&id=870598 Regards Penn Elcom
Did you find what you were looking for?
Write Your Own Review
You're reviewing:1U Rack Drawer with 2 Slam Locks
Your Rating

Enquire about this product

For price, stock availability and other information about this product, please contact us using the form below.

sgm_clp_1 div for segmentify