1U Rack Panels Punched for 8 x D-Series Connectors

Part No
R1269/1UK/08
£10.31 £8.59
In stock
1U Rack Panels Punched for 8 x Neutrik D-Series Connectors (XLR, Speakon, RJ45, etc.)

Keep your electronics organised and structured.
1U Rack Panels Punched for 8 x Neutrik D-Series Connectors (XLR, Speakon, RJ45, etc.)

Keep your electronics organised and structured.


3D Model
Technical Information
Number of Connectors 8
Material 1.2mm Steel
Size (U) 1U
Weight 244g
Connectors D-Series
Finish Black
Customer Questions
Rather than the overall length of the entire panel, how long is the area containing the punched holes specifically? R1269/1UK/08
The measurement you require is 99.8mm / 3.92"
Are the screw holes threaded? If so what size screw will fit.
Hi The holes on R1269/1UK/08 are not threaded. If you mount the chassis connectors from the rear you can use - HSM3C12BP-100 And MFD Thanks Penn Elcom
what is the weight of this please?
Thank you for your question, The weight of the R1269/1UK/08 product is 0.24kg/0.54lb Many thanks Penn Elcom
are plugs/blanks available to cover unneeded punched-out holes.
Thank you for the question. There are different plug/blank options for the punch holes and these can be found in our accessories section: penn-elcom.com/cables-connectors/connectors/accessories
Are the holes punched exactly centred on the panel or are they offset to allow engraving above/below the hole?
Thank you for the question. These R1269/1UK/08 panels do have space to allow for letters/numbers above the holes. We offer a custom service to print on the panels with UV or laser etch.
Did you find what you were looking for?
Write Your Own Review
You're reviewing:1U Rack Panels Punched for 8 x D-Series Connectors
Your Rating

Enquire about this product

For price, stock availability and other information about this product, please contact us using the form below.

sgm_clp_1 div for segmentify