Christine
desde
United Kingdom
preguntas
Can this be wired into a plug and plugged into a socket?
|
Respuestas de PennElcomOnline:
|
Hi. I'm afraid not. This product works at DC current and voltage. You will need an LED power supply. Feel free to contact us at led@penn-elcom.com should you need further guidance.
|
Peter
desde
Australia
preguntas
What voltage do these run on & what power supply do you recommend?
|
Respuestas de PennElcomOnline:
|
Thank You for your enquiry.
I can confirm these run on 3 volts DC at 350ma, The dragon eye range is pwoered by constant current drivers below are the drivers we stock and recommend -
LEDOTE13350PC. This can drive a min of 7 dragon eyes and a max of 11, Mains dimmable Osram driver
LEDOTE18350PC. This can drive a min of 10 dragon eyes and a max of 16, Mains dimmable Osram driver
LEDMDCCELED15. This can drive a min of 1 dragon eye and a max of 13, Mains dimmable EcoPac driver
LEDMWLCM25. This can drive a min of 3 dragon eyes and a max of 16, 1-10V dimmable MeanWell driver
LEDOTDALI151A0LT2. This can drive a min of 3 dragon eyes and a max of 16, DALI dimmable Osram driver
|
eddie
desde
France
preguntas
bonjour
je souhaite installer 15 dragon eye en série .est ce possible?
quel transfo dois acheter? et dimmable ?
je vous remercie
Eddie
|
Respuestas de PennElcomOnline:
|
Bonjour Eddie,
Merci pour votre question. Qui, ca c'est possible. Le transfo e Ote 18 350mA, notre part: LEDOTE18350PC. Le trafo e dimmable avec via début/fin de phase (phase-cut/mains dimming). Pour l'installation indépendante du tranfo, vous aurez également besoin du serre-câble, notre part: LEDOTCLAMPE. Pour plus d'informations contactez nous à led@penn-elcom.com
|
