Quiet Exhaust Solution for Flight Case Racks

Part No
FT80-Q-FC
€158.27 €131.89
In stock
Quiet Exhaust Solution for Flight Case Racks Penn Elcom brings you a new and quiet exhaust fan unit for flight case racking that is mounted into a Penn Elcom large dish for your convenience. The...
Quiet Exhaust Solution for Flight Case Racks Penn Elcom brings you a new and quiet exhaust fan unit for flight case racking that is mounted into a Penn Elcom large dish for your convenience. 

The FT80-Q-FC regulates the enclosure’s temperature by expelling hot air, preventing thermal failure. Thermal failure is caused by many generic in-board fans that simply circulate hot air within the enclosure rather than expelling it.

 - Low noise level 22.5dBA (0.3 sone)
 - Dimensions: 178mm x 127mm x 47.5mm
 - 28CFM (47.6m³/h) at 2000 RPM
 - High static pressure
 - 1 x 9 bladed 80mm / 3.15" fan
 - 12V DC - 200mA
 - 2 x DC in/out sockets
 - Temperature sensor socket
 - 500mA universal PSU supplied
 - Combined weight of 400g
 - Fluid bearings = 2 year limited warrantee

A second unit can also be run from the 500mA power supply by using a CRC-LINK cable. 
Thermal sensor accessory included, the CRC-TEMP can be Plugged into the TEMP socket.


More information
3D Content Central
Technical Information
Weight 400g
Finish Black
Customer Questions
What is the maximum panel thickness that this exhaust fan will fit through?
The FT80-Q-FC can be used on all panels up to a thickness of 20mm / 0.78 Inches
Please can you provide approvals information for this fan? In particular, we need the notified body approvals (e.g. UL, VDE, CB, TUV etc), are you able to provide them please?
Thank you for your enquiry, We can supply approval for FT80-Q-FC and our products, please send your request to [email protected] Regards Penn Elcom
Did you find what you were looking for?
Write Your Own Review
You're reviewing:Quiet Exhaust Solution for Flight Case Racks

Enquire about this product

For price, stock availability and other information about this product, please contact us using the form below.

sgm_clp_1 div for segmentify