Comus Led in-line joiner (jumper) for 10mm strips Ip20 LEDCLJ2PIN10  £0.97


イメージを拡大
アイテムコード在庫価格希望小売価格保存する
LEDCLJ2PIN10在庫あり1
£0.97
 
購入
次に注文する 21 時間 06  52  明日発送用
配送料金 United Kingdom このアイテムには £5.40
FREE UK Delivery Over £100
Trust pennelcomonline.com for excellent service
  • 説明
  • レビュー
  • プライスマッチリクエスト
  • Q&A
Comus 2pin quick in-line joiner (board-to-board connector) for 10mm wide LED strips

This quick to use joiner saves time and effort compared to other joiners avaialble on the market.
It also removes the need to solder on site and reduces wastage by allowing to connect off cuts together.

Easy to use jumper. Just unclick the upper parts of the joiner, carefully push the two 10mm strips inside until the PCB pad fits below the 2 pins on each side.
Always take note to ensure correct polarity before powering the strips.

Compatible with all single colour Osram or Comus LED strips IP20 not wider than 10mm having up to 70 LED chips per meter.
NOT suitable to be used with ShortPitch tapes (120 LEDs/m).
This power feeder can carry a max. current of 3A (so 72W at 24V or 36W at 12V).

Fixing - we strongly recommend the use of a double adhesive tape underneath the joiner or the use of silicone.
This will fix the device in place protecting the start of the LED tape on the long run.

Suitable profiles
With cover - LEDAL01, LEDAL03, LEDAL09, LEDAL11, LEDAL12, LEDAL13, LEDAL16, LEDAL20, LEDAL21, LEDAL23, LEDAL26, LEDAL27, LEDAL29, LEDAL30, LEDAL31, LEDAL32, LEDAL33, LEDAL40, LEDAL41, LEDAL42

Rated current: 3 A
Max wattage (12/24V): 36/72 W
LED strip required width: 10 mm
Cable length: no cable
Rated voltage: <25 V
Width: 20 mm
Length: 16 mm
Height: 5 mm
Quantity: sold individually
関連製品
Comus Led strip Mini Pitch 12V 27k Single colour LEDCLS1C144827
価格 £63.53
ベストセラー Comus LED Flex and Modules
Loading ...
ベストセラー LED Flex and Modules
Loading ...
ベストセラー Comus 製品
Loading ...