Comus Led T wire for connection of 8mm strips Ip20 LEDCTWIRE8SC  £0.50


Увеличить изображение
Код товараСток КоличествоЦенаОбычная рыночная ценаЭкономия
LEDCTWIRE8SCВ наличии1
£0.50
 
Купить
Закажите в течение 21 Часов 09 минут 29 секунд для отправки завтра
Доставка в United Kingdom на этот товар £5.40
FREE UK Delivery Over £100
Trust pennelcomonline.com for excellent service
  • Описание
  • Отзывы
  • Запрос на выравнивание цены
  • Вопросы и ответы
Comus 2pin wire for connecting up to 3x 8mm LED strips in a T shape

The T shape wired can be used with up to three in-line joiners (LEDCLJ2PIN8 or LEDCLJD2PIN8) to allow a quick connection of up to three LED strips.

Easy to fit allowing solderless connection. Just unclick the upper part on each free end of the joiners then carefully push each end of the wire inside the joiners until the PCB pad fits below the 2 pins.
Always take note to ensure correct polarity before powering the strips.

This wire can carry a max. current of 3A (so 72W at 24V or 36W at 12V).

Fixing - we strongly recommend the use of a double adhesive tape underneath the joiners or the use of silicone. This will fix the devices in place protecting the start of the LED tape on the long run.

Rated current: 3 A
Max wattage (12/24V): 36/72 W
Compatible joiners (board-to-board connectors): LEDCLJ2PIN8 or LEDCLJD2PIN8
Cable rated insulation voltage: <25 V
Width: 16 mm
Length: 24 mm
Height: <1 mm
Quantity: sold individually
Похожие товары
Comus Led strip Shortpitch 24V 3k Single colour LEDCLSS96830
Цена £70.45
Наши бестселлеры Comus LED Flex and Modules
Loading ...
Наши бестселлеры LED Flex and Modules
Loading ...
Наши бестселлеры Comus Товары
Loading ...