Osram Led Driver Oti Dali 35/220-240/700 Lt2 L 4052899245389  £27.36

Enlarge Image
LEDOTIDALI35700In Stock1
Postage for United Kingdom on this item is £5.40
FREE UK Delivery Over £100
Trust pennelcomonline.com for excellent service
  • Description
  • Reviews
  • Q&A
OTi DALI 35/220-240/700 LT2 L

OPTOTRONIC Intelligent - Dimmable DALI

Product benefits

Versatile DALI window driver up to 90 W due to flexible output characteristic
Very high efficiency and reliability
Protection of the system thanks to thermal management and Smart Control

Product Features

Supply voltage 220-240 V
Line frequency 0 Hz - 50 Hz - 60 Hz
Line voltage 198-264 V
Safety according to EN 61347-1, 61347-2-3, 61347-2-13, 62384
RI suppression according to EN 55015:2007+A1:2007/CDN
Line harmonics according to EN 61000-3-2
Immunity according to EN 61547
Lifetime: up to 100000 h (temperature at Tc = 65 C, max. 10 % failure rate)

Areas of application

Installation in emergency lighting systems according to IEC 61347-2-3, appendix J
Suitable for use in luminaires with flexible current setting (DALI, CLO, LEDset)
Suitable for indoor SELV and non-SELV installations
Suitable for luminaires of protection class I

Versatile scope of application due to OSRAM DALI Technology

Easy to use in corridors and restrooms because of three-level Corridor function
Touch DIM application: easy to control via pushbutton or sensor
Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
Feedback of power consumption and operating hours (Fit for SMART GRID)
Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting

EAN: 4052899245389
Output power: 35 W
Input voltage AC: 198 - 264 V
Input voltage DC: 176 - 276 V
Mains frequency: 50/60 Hz
Nominal output voltage: 20 - 54 V
Nominal output current: 200 - 700 mA
Power loss in stand-by mode: <0.5 W
Nominal voltage: 220 - 240 V
Nominal current: 0.18 A
Device power losses: 4.4 W
Power factor ? (full load at 230V): 0.95
ECG efficiency: 89 %
Inrush current: 32 A
Max. no. of ECGs on circuit breaker 10 A: 18
Max. no. of ECGs on circuit breaker 16 A: 30
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Length: 360 mm
Width: 30 mm
Mounting hole spacing, length: 350 mm
Height: 21 mm
Product weight: 275 g
Cable cross-section, input side: 0.5-1.5 sqmm
Cable cross-section, output side: 0.5-1.5 sqmm
Wire preparation length, input side: 8.5-9.5 ??
Casing material: Metal
Ambient temperature range: -25 +60 C
Temperature range at storage: -25 +75 C
Maximum temperature at tc test point: 75 C
Max.housing temperature in case of fault: 110 C
ECG lifetime: 50000 h
Encapsulated: No
Dimmable: Yes
Dimming range (for maximum nominal output current): 1-100 %
Suitable for fixtures with prot. class: I
Dimming interface: DALI / Touch DIM / Touch DIM Sensor
Constant Lumen Function: Programmable
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Max. cable length to lamp/LED module: 2 m
Type of protection: IP20
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384
Approval marks - approval: ENEC 10 / VDE / EMC / EL / CE
Manufacturers Website: www.osram.com/osram_com/products/ electronics/electronic-control-gears-for-led-modules-and-dimmers/indoor-ecg-for-led-modules-and-dimmers/linear-area-constant-current-dimmable/optotronic-intelligent


Declaration of ConformityDownload
Family DatasheetDownload
Product DatasheetDownload
Technical Support FileDownload
VDE CertificateDownload

Related Products
Our Best Selling Osram LED Power Supplies and Controls
Loading ...
Our Best Selling LED Power Supplies and Controls
Loading ...
Our Best Selling Osram Products
Loading ...