Penn Elcom Cross 5 Half Ramp Section CROSS5-RAMP-500

In StockCROSS5-RAMP-500
Please select an item from the list
Be the first to review this product Write A Review
  • Description
  • Downloads & Datasheets
  • Reviews
  • Price Match Request
  • Q&A

CROSS 5 is more than just a crossover.

Forged from high quality thermoplastic polyurethane (TPU), CROSS 5 is a five channel crossover system that gives you unrivalled strength, abrasion resistance and flexibility, with NEW fire retardant technology. 

Its ingenious design enables a wide variety of crossover combinations, whatever your cable management needs. The two elements that enable this system are the base section and the ramp section. 

HALF BASE SECTION: The base sections acts as a connector piece, from which many combinations of cross over systems can be created. 

HALF RAMP SECTION: The ramp section has a 15° angle of inclination, the optimal angle for vehicles to drive over. 

• Highly tear-proof and high form stability. 
• Indented channel ridges to prevent the lid bowing under pressure. 
• Resistant to most oils, fats and chemicals. 
• Fire retardant (DIN EN 13501-1). 
• Can withstand 5 tonnes of direct pressure. 
• Coloured lids can be changed. 
• Fixed lid in drive over position. 
• Quick and easy assembly. 
• MAX PERFORMANCE: anti-sliding pads available for hexagonal base. 

Half Base Section 
• Length: 500mm / 19.5" 
• Width: 370mm / 14.57" 
• Width of x2 base pieces side by side: 800mm / 31.5" 
• Height: 58mm / 2.28" 
• Weight: 12kg/26.46lb 
• Cable channels: width 40mm / 1.57", height 44mm / 1.73" 

Half Ramp Section 
• Length: 500mm / 19.5" 
• Width: 230mm / 9.06" 
• Height: 50mm / 1.97" 
• Weight: 5kg/11.02lb 
• Incline angle: 15° 

Wheelchair Section 
• Length: 500mm / 19.5" 
• Width: 1.2m / 47" 
• Height: 62mm / 2.44" 
• Incline angle: 3.4° / 6%

Order in the next 11 Hours 25 minutes 28 seconds for dispatch today
Our Best Selling Penn Elcom Cable Protectors
Our Best Selling Penn Elcom Products