Penn Elcom LED RGB Diffuse (Neon) Waterproofed Flex 20W/m IP65
The 20 W/m Neon RGB flex is an LED strip with a stylish design providing a continuous lighting effect.
The product flexibility allows designs that had not been possible before with conventional LED strips.
The diffused coat ensures no visible spots while also offering splash protection.
It offers the user the possibility to choose the preferred colour from the RGB spectrum.
The use of a heat sink (aluminium channel or flat bar) is mandatory.
No adhesive tape on the back. Fixing by clips only.
Accessories supplied with each reel - 10 mounting clips, 20 screws, 4 end caps (2 with hole, 2 without hole).
Areas of application
Entertainment zones
Residential lighting
Walkways
Architectural illumination
Feature lighting
Architectural lighting
Decorative lighting
Power consumption: 120 W
Wattage per meter: 20 W/m
LED chip type: SMD 5050
Construction: PCB
Type of protection: IP65
Self-Adhesive tape: No
Input voltage: 24Vdc
Reverse voltage: 25 V
Length: 5000 mm
Width : 10 mm
Height: 11 mm
Smallest cutting point: 62.5 mm
Colour rendering index: N/A
Beam Angle: 120 Deg
Energy efficiency rating: A
Estimated lifespan: 35000 hrs
Warranty: 2 years
Binning: single bin
Colour temperature: RGB
Energy consumption: 72 kWh/1000h
Luminous flux: 2850 lm
Luminous flux per meter: 710 lm
Luminous efficacy (RGB): 36 lm/W
Number of LEDs per reel: 300
Number of LEDs per meter: 60
Temperature range in operation: -20 +65 C
Temperature range at storage: -30 +75
Dimmable: Yes
