Penn Elcom LED TW COLOUR Diffuse (Neon) Waterproofed Flex 90CRI 23W/m IP65 2400-5000K
The 23 W/m Tunable White Neon flex is an LED strip with a stylish design. It provides a continuous lighting effect while also offering the possibility
to tune through different shades of white. Its high flexibility allows designs that were not possible before with traditional LED strips.
The use of a heat sink (aluminium channel or flat bar) is mandatory. No adhesive tape on the back. Fixing by clips only. Accessories supplied with each reel - 10 mounting clips, 20 screws, 4 end caps (2 with hole, 2 without hole).
Areas of application
Architectural lighting
Decorative lighting
Backlighting
Event lighting
Object integration e.g.handrails
Signage and illuminated advertising
Power consumption (@4000K): 115 W
Wattage per meter (@4000K): 23 W/m
LED chip type: SMD 3528
Construction: PCB
Type of protection: IP65
Self-Adhesive tape: 3M
Input voltage: 24Vdc
Reverse voltage: 25 V
Length: 5000 mm
Width: 10 mm
Height: 11 mm
Smallest cutting point: 38.5 mm
Colour rendering index: Ra >90
Beam Angle: 120 Deg
Energy efficiency rating: A
Estimated lifespan: 35000 hrs
Warranty: 2 years
Binning: single bin
Colour temperature: 2400-5000K
Colour appearance: Tunable White
Energy consumption: 115 kWh/1000h
Luminous flux (@4000K): 7400 lm
Luminous flux per meter (@4000K): 1480 lm
Luminous efficacy (@4000K): 64 lm/W
Number of LEDs per reel: 780
Number of LEDs per meter: 156
Temperature range in operation: -20 +65 C
Temperature range at storage: -30 +75
Dimmable: Yes
