The ZGRIDLED dimmer has been specifically designed to dim LED loads by using a proprietry control system which in real time analyses the LED�s current waveform and calculates the optimum dimming range. This advanced software was developed by us at Zano Controls to consistently & effectively control lamp born flicker. The ZGRIDLED will also effectively dim CFL lamps.
For installation guidelines please use the attached datasheet.
The product is supplied with 8 grid front adaptors from DETA, GET, BG, Wandsworth, MK Logic, Hamilton, MEM and Crabtree.
Single gang grid dimmer switch designed specifically to work with
LED�s & compatible with all LED lamps.
Will dim a mix of manufacturers LED�s on one circuit.
( We are yet to find a dimmable LED that will not dim flicker free. )
Proprietry control system which analyses the LED�s current
waveform and calculates the optimum dimming range.
Minimum load 5 watts.
Maximum load 250 watts.
Silent in operation & aids lamp & driver noise reduction.
The dimmer controls the duty cycle synced to the zero crossing.
Two way switch operation.
Active minimum level pre set to allow for power supplies to
energise lamp at low levels.
Real time over current analysis and automatic shut down which
also protects the dimmer itself, switching off before any damage
can occur, extending the life expectancy of the product.
Real time thermal analysis and automatic shut down which also
protects the dimmer itself, switching off before any damage can
occur, extending the life expectancy of the product.
Works with leading & trailing edge lamps & drivers.
Manufacturer reference: ZGRIDLED
Lamp type: LED/CFL
Max load: 250 W
Min load: 5 W
Dimming method: Mains
Manufacturers Website: www.zanocontrols.co.uk/wp-