|首页LED可伸缩模块Penn Elcom Led strip Rgbw 24v Ip66 19.2W with Warm White LEDCL192RGBW27P66||
Penn Elcom Led strip Rgbw 24v Ip66 19.2W with Warm White LEDCL192RGBW27P66 £94.60
Penn Elcom LED RGBW Flex (with warm at 2700k) 19.2W/m IP66 Waterproofed
The 19.2 W/m RGBW IP66 is an LED strip with a medium lumen output, splash and UV proofed.
It offers the user the possibility not only to choose from the RGB spectrum but also to get a nice warm white colour (2700K) which cannot be achieved by simply mixing the RGB.
Each reel is supplied with an IP66 KIt extremelly useful should you need to cut the reel into smaller lenghts.
The KIT includes: 1 special cable end cap (with hole to take wires thru), 4 standard end caps (for sealing the opposite end of the one being powered up), 12 fixing clips and 24 screws.
The use of a heat sink (aluminium channel or flat bar) is mandatory.
Areas of application
Residential architectural lighting
Caf�s, restaurants and bars
Power consumption: 96 W
Wattage per meter: 19.2 W/m
LED chip type: SMD 5050
Type of protection: IP66
Self-Adhesive tape: 3M
Input voltage: 24Vdc
Reverse voltage: 25 V
Length: 5000 mm
Width : 14.5 mm
Height: 5.5 mm
Smallest cutting point: 100 mm
Colour rendering index (white): Ra >80
Beam Angle: 120 Deg
Energy efficiency rating: A
Estimated lifespan: 35000 hrs
Warranty: 2 years
Binning: single bin
Colour temperature: RGB + 2700 K
Energy consumption: 96 kWh/1000h
Luminous flux (RGB): 2800 lm
Luminous flux (White): 1950 lm
Luminous flux per meter (RGB): 560 lm
Luminous flux per meter (white): 390 lm
Luminous efficacy: 49 lm/W
Number of LEDs per reel: 300
Number of LEDs per meter: 60
Temperature range in operation: -20 +65 C
Temperature range at storage: -30 +75
Jennifer 从 United States 问
Could you tell me if you have a 3D model available for this part so I can place it into my next higher assembly?
Gary 从 United Kingdom 问
is this available in 304 stainless steel with stainless runners